Ultimate Body Press Wall Mounted Pull Up Bar

Ultimate Body Press Wall Mounted Pull Up Bar Installation instructions You Can Buy This Great Pull Up Bar Directly From Amazon: http://amzn.to/2bJZ9iI To read whole review of Ultimate Body Press Wall Mounted Pull Up Bar visit: http://www.pullupbars101.com/ultimate-body-press-wall-mounted-review/ In this video I go over the pieces that come in the box as well as walking through the entire install process. In order to keep the video under the 10 minute limit I had to speed some parts up, but not much. The entire install process took 15 minutes - with an additional 10 minutes for getting out tools and putting them back away. If you don't watch the video, let me stress that the INSTRUCTIONS ARE WRONG when they say to pre-drill four 7/16" holes for the lag bolts. You should pre-drill 7/32" holes instead. That's a big difference! As far as the bar itself goes, it has turned out to be very solid. I'm 6'7" and 220lbs - and the bar holds my weight without any problems at all. One reason I went with the wall-mounted bar instead of one that just hangs in a doorway is because of my height, but I also think this looks better than the door-frame versions and you don't have to worry about damage to the molding or having to store it. I am completely convinced that this bar will last for years. When installed, the bar is 12" from the wall and is a total of 38" wide. The front-facing handles stick out about 19.5" (to the very tips). The center-line of the two supports are exactly 16" apart - which is great for mounting to typically spaced wall studs (although, you should check where you want to install the bar before ordering).