making of shaped neck

uma-dressmaking-uma.blogspot.com - Fundamentals of tailoring SHAPED FACING :---The shaped facing is cut to the exact shape of the garment edge to which it is to be applied . Usually it is cut on the same grain as the sectoin of the garment . Shaped facing is often used to finish square or " v " neck lines or scalleped edges . It is easier to apply than bias facing and is less conspicuous . It is usually cut separately for front and back and these pieces are joined by a plain seam finish the outer edge of the facing by turning up the edge and stitching it .Carefully tack the facing up the edge and stitching it . Carefully tack the facing to the garment right sides facing and seam lines , centre lines and notches matching . Trim and clip . Turn the facing to the wrong side under stitch it to the seam and hem the folded edge of the facing to the garment .