X666 SKULLCOPTER MAIDEN

Links are in the description for all the parts used in this build. This is the maiden flight of my custom Skullcopter. Its using the x666 frame and KK2 board. P gain is set to 85 and the I gain is 75. This is a big quad!!! To give you an idea on how big it is, I'm using 12inch props. Everything is done just have to solder up the rest of the L.E.D.'s Hobbyking X666 Glass Fiber Quadcopter Frame 666mm: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24227&aff=722713 800kv MOTORS FROM EBAY TURNIGY Plush 30amp Speed Controller: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=2164&aff=722713 12x4.5 SF Props BLUE: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25825&aff=722713 12x4.5 SF Props YELLOW: http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25829&aff=722713 Hobbyking KK2.0 Multi-rotor LCD Flight Control Board http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24723&aff=722713 Turnigy High Density R/C LED Flexible Strip-Blue http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=8942&aff=722713 Turnigy High Density R/C LED Flexible Strip-Red http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=8941&aff=722713 LED ON OFF SWITCH http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=8833&aff=722713 4mm Gold Connectors http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=67&aff=722713 Turnigy 5mm Heat Shrink Tube - BLACK http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=3833&aff=722713 Turnigy 5mm Heat Shrink Tube - RED http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=5278&aff=722713 Turnigy Pure-Silicone Wire 14AWG http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9679&aff=722713 Turnigy Pure-Silicone Wire 14AWG RED http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9678&aff=722713 HXT 4mm Gold Connector w/ Protector THESE ARE THE BEST CONNECTORS IN MY OPINION , VERY EASY TO PULL APART http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9283&aff=722713 Turnigy 2650mAh 3S 30C Lipo Pack http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9267&aff=722713 Turnigy 1000mAh 3S 20C Lipo Pack JUST TO RUN ALL THE LED'S http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9163&aff=722713 JST Male 2 pin connector http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9630&aff=722713 JST Female connector http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=9631&aff=722713