Two ILI9341 based display attached to a Raspberry Pi.

Additional information: Kernel config file, TFT enabled. https://drive.google.com/file/d/0B5PYG94CDdBtcWRCSktYMFhEakk/edit?usp=sharing cmdline.txt including TFT configuration. https://drive.google.com/file/d/0B5PYG94CDdBtWTFCcHhubGdxMEk/edit?usp=sharing I planned to create a patch, but I did not find the original RPi kernel source (3.6.y). I have the working copy of the modified kernel source, however: https://drive.google.com/file/d/0B5PYG94CDdBtY2l0R3Uzd1BESVU/edit?usp=sharing Unfortunately, there is no schematic, however wiring is pretty simple: LCD0 - RPi SDO(MISO) - MISO/GPIO9, pin21 (common) LED - 5V through 1k resistor, pin 2 (common) SCK - CLK/GPIO11, pin23 (common) SDI(MOSI) - MOSI/GPIO10, pin19 (common) D/C - GPIO24, pin18 RESET - GPIO25, pin22 CS - CE0/GPIO8, pin24 GND - GND, pin 6 (common) VCC - 3.3V, pin 1 (common) LCD1 - RPi SDO(MISO) - MISO/GPIO9, pin21 (common) LED - 5V through 1k resistor, pin 2 (common) SCK - CLK/GPIO11, pin23 (common) SDI(MOSI) - MOSI/GPIO10, pin19 (common) D/C - GPIO18, pin12 RESET - GPIO23, pin16 CS - CE1/GPIO7, pin26 GND - GND, pin 6 (common) VCC - 3.3V, pin 1 (common) Display module: http://www.ebay.com/itm/1PC-2-2-Inch-SPI-TFT-LCD-Serial-Port-Module-Display-ILI9341-5V-3-3V-New-/190923137633?pt=LH_DefaultDomain_0&hash=item2c73e7e261