toyota caldina engine mounts.AVI.2

to remove rear engine mount, remove front bottom mount by radiator fans,lossen top mounts. now.. rear engine mount... remove four bolts from underneath,move exhaust mount back(obstructing one bolt), remove tiny hose bracket that attaches to engine mount( wrench this flexible pipe up and out of the way.then take main bolt out that goes thru rubber bush, now you have to lower horizontal sub-frame, everything except for rubber pinion bush to wishbone arrangement. 3 bollts on each side, use a pipe on end of wrench to get leverage. get crow bar in and bring whole suspended member down 2 inches, and bring mount out as shown, to install use jack under sump to align the bolt to bush... tighten all mounts etc, take care grant cost? NZ$100 for second hand mounts in superb nick, thanks to toyota wreckers wakefield st petone wgtn.. or $270 new