Thermostat Housing Replace and Bleeding Air from Cooling System - 2015 Jeep Wrangler JK 3.6L

It's time to take care of that leak! I wanted to do this before the Moab trip, and I'm running out of time. So, today was the day! In this video, I change out my thermostat and housing assembly. I didn't drain the radiator for this, and then I show how I bled the air out of the cooling system with help of a spillproof funnel. ? Please SUBSCRIBE if you want to see my videos! ? Here are the parts I mentioned: EPAuto Spill Proof Radiator Coolant Filling Funnel Kit: https://amzn.to/2MJad4f MOPAR 5184651AH - OEM Part - Thermostat and Housing: https://amzn.to/2o28CbK Here's what MY manual says about the coolant I need: MS-12106 OAT (MS-90032) The engine cooling system must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect against engine overheating. A solution of 50% OAT (Organic Additive Technology) coolant that meets the requirements of Chrysler Material Standard MS-12106 and 50% water is recommended. Refer to “Maintenance Procedures” in “Maintaining Your Vehicle” for proper coolant selection. MAKE SURE YOU KNOW WHICH COOLANT YOUR SPECIFIC YEAR NEEDS. It's confusing I know. Check your owners manual!