Testing Rodger Briefs

The Rodger Wireless Bedwetting Alarm System features unique moisture sensing underwear and uses wireless technology to solve your child’s bedwetting problem. The comfortable unisex briefs have sewn in moisture-sensing threads, which allow the entire brief to sense the urine. This enables the Rodger Wireless to detect wetness faster than most other bedwetting alarms and saves you from having to worry about sensor placement. Those threads connect to a small transmitter which is snapped to the waist of the briefs. When wetness occurs, a signal is sent to the receiver and the alarm is triggered. In this video, we show you how to test the briefs to ensure they are detecting moisture effectively. Testing Rodger Briefs: First, make sure your receiver and transmitter are paired before testing your briefs. (Watch the Rodger Pairing Video) Plug your receiver into the wall Make sure the green light is on. If not, push the button in the middle of the receiver to turn it on. Then make sure the volume is up Snap the transmitter onto the briefs Mix hot water and a ½ tsp of salt to make salt water solution Pour the solution onto the briefs where the sensors are. Alarm should sound If the alarm does not sound, remove transmitter. Then soak the briefs in Oxyclean or vinegar/water solution. Dry, then repeat the test. If the briefs still do not sound, contact us. 800-214-9605 Monday - Friday 8am-6pm EST Visit bedwettingstore.com for more tips! http://bedwettingstore.com/rodger-wireless-bedwetting-alarm.html http://bedwettingstore.com/bedwetting-alarms.html https://www.youtube.com/watch?v=C3xuBRl2EQk