Shift Lock Release [EASY] - Hyundai Elantra - 2017/2018 - How to / DIY

Your shifter is STUCK in park and THIS Video will help you [EASILY] get it out of park! Your car's battery is dead! You have a helpful bystander who can help you jump start your car, but the vehicle is parked in a way where the cables are not long enough to reach your battery! Your car runs out of fuel but can't push your car to the nearest gas station (fueling station/petrol pump/gasoline station) Learn How to Shift Lock Release on a 2017 Hyundai Elantra / 2018 Hyundai Elantra [EASY]. Tools Needed: 00:20 Flat Headed Screwdriver (Vehicle should come with one. Should be in the same place as the spare tire. In the trunk, under the trunk carpet). 1. 00:28 Ensure the engine is turned off and emergency brake is engaged 2. 00:43 Locate the Shift lock release cover is to the left of the gear shift knob. There should be a label on it that reads 'Shift Lock Release'. 3. 00:46 On the Shift lock release cover there is a small notch. Put the screwdriver in this notch and pry the cover out. Once the screwdriver is in the notch, wiggle it a little bit and try pulling the screwdriver up. Be careful! You don't want that cover to fly off as you pop it off. 4. 01:18 Once the cover is off, you will see a black colored flat pin. Use the screwdriver to push on that pin. As long as the pin is pushed the Shifter is released. So push on the pin and then shift the Shifter to desired gear position. 5. 01:35 As soon you release the pin, the shift lock will be re-engaged. Watch more EASY TIPS for your 2017 / 2018 Hyundai Elantra: https://www.youtube.com/watch?v=8PEfBsqbU3Y&list=PLFtKj3oFrQPPPbwWkvuxXsqWDD4WYxfXx If you want your next car buying experience to be stress-free than check out https://www.virar.ca . However buying the vehicle is just the first step of the car ownership journey. This channel is to make the next step of day-to-day car ownership enjoyable and empowering. *************************************************************************************************** DISCLAIMER: Due to factors beyond the control of Virar Technologies, we cannot guarantee against improper use or unauthorized modifications of this information. Virar Technologies assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Virar Technologies recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Virar Technologies, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not of Virar Technologies. #shiftlockrelease #virartech #carowner