Samsung LED TV Repair - T-Con Board Replacement - No Picture on Screen, Image Fades to Black UN60

How to replace the T-Con part number BN95-00628C in a Samsung 60" LED TV. CLICK HERE for replacement t-con: http://www.shopjimmy.com/catalogsearch/result/?q=BN95-00628C TV Model Numbers: UN60EH6000FXZA HS01 UN60EH6050FXZA UN60ES6100FXZA UN60EH6003FXZA UN60EH6003FXZA HH01 UN60EH6050FXZA HS01 UN60ES6100FXZA HH01 UN60FH6003FXZA HH01 UN60EH6003FXZA UN60FH6200FXZA UN60H6203AFXZA UN60EH6003FXZA IH02 Part Numbers: BN95-00628A BN95-00708A BN95-00628B BN95-00708B BN95-00628C BN95-00708C BN95-00944C BN96-28943A BN96-28944A In this video we will show how to replace the T-Con board in the Samsung sixty inch LED TV. For these TV models, you will want to replace your t-con board if your TV is showing the following symptoms. The first symptom: If your TV has backlight, but has no video or picture. The second symptom: If the video or picture on the screen fades to all black shortly after turning on the TV. We will now show how to replace the T-Con board. I have removed all of the screws from the back of the TV and removed the back cover. As you can see, we have three boards. Over here is the main board, here we have the power supply / LED board. Down here we have the T-Con board. We will take a closer look at the T-Con board and how to remove the board from the panel. I will start by disconnecting the LVDS cable. Pinch in on the sides of the connector and pull back gently away from the board. Be sure to use caution as this cable is fragile. Next, I will disconnect the ribbon cables. First I will flip up this black tab using my finger and then lift out the ribbon. Never use a screwdriver or any other tool to flip up the tab or remove the ribbon. Be sure to use caution as these cables are fragile. After I have disconnected the cables from the T-Con board, I will remove the screws that hold the board to the TV panel. After I have removed the screws, I can simply lift the board from the panel. I will now install my replacement board. I will begin by securing the board to the panel with the screws. Next, I will reconnect the ribbon cables. I will make sure the black tab is still flipped up and then I will line up the ribbon cable on the connection. Once it is in place, I will close the tab to secure the ribbon. Next, I will reconnect the LVDS cable. I will again pinch in on the sides of the connection and then gently push it into place on the board. After we have installed the replacement T-Con board I will then put the back cover on the TV and reinstall the screws to secure it. TV Repair Made Easy™ © 2015 ShopJimmy.com, LLC.