Quick FRS program of TRI-152 replica

EDIT: Not in the video but make sure you are in BAND, UHF1 under Menu #1. You will need to complete this step in order to get in the frequency range of the FRS/GMRS systems On Standby mode or Off Hold the Menu Button which is the Up button on the left side of the radio which should bring you to Frequency mode. From there type in the FRS Channel. For instructional purposes, I will use Channel 1 of the FRS system. on the screen, type in the FRS Channel 1 as 462.562 and will show up on certain radios as .556 as the last 3 digits. Just press the + button and should bring you to the correct freq., 462.562. Next, press the Menu button and press 3 2 or the plus button until you bring up MEMCH and press Menu again which should bring up either CH-001 or any number. It can be blank and be _ _ 001 and just press the menu button again. You have programmed the the first freq into your channel. To use that channel or to get off FREQ mode, turn the radio on standby and press and hold the Menu button for 2 seconds and then turn it on. 1 FRS / GMRS 462.5625 2 FRS / GMRS 462.5875 3 FRS / GMRS 462.6125 4 FRS / GMRS 462.6375 5 FRS / GMRS 462.6625 6 FRS / GMRS 462.6875 7 FRS / GMRS 462.7125 8 FRS 467.5625 9 FRS 467.5875 10 FRS 467.6125 11 FRS 467.6375 12 FRS 467.6625 13 FRS 467.6875 14 FRS 467.7125 15 GMRS 462.5500 16 GMRS 462.5750 17 GMRS 462.6000 18 GMRS 462.6250 19 GMRS 462.6500 20 GMRS 462.6750 21 GMRS 462.7000 22 GMRS 462.7250