(Part 2) Extended Testing - Boscam LCD-RX5802 Interference [SOLVED]

This issue has been SOLVED. Leaving posted for learning purposes of others. Essentially there ended up being a few problems. (1) I was using a Fatshark 600mW transmitter with a Boscam diversity receiver (works okay, but higher chances of interference due to frequencies being off by about 1 MHz). (2) The DJI radio causes significant interference, so placing a foil cover over the base of the antenna cleans up the signal significantly. (3) The Fatshark Omni antennas are also fairly low quality which only contributed further to the issue; ended up changing to VAS Bluebeam Ultras. Original Problem: Horizontal bands of interference, total loss of signal at short range. Equipment being used: - DJI Phantom 2 + H3-3D - HERO3+ Black, Wi-Fi OFF - Mini iOSD - Immersion 600mW TX on Channels 1 and 2 - Boscam RX-LCD5802 diversity receiver - Fatshark Omni TX/RX antennas - Fatshark Patch RX antenna