PandaHall Presents: http://www.pandahall.com/. Free Coupons: PHENYTB5 (Save $5 for $70+); PHENYTB10 (Save $10 for $140+); PHENYTB15 (Save $15 for $215+). Valid time: Jul. 21, 2017 to Jul. 21, 2018. PST Besides, when you first time join Pandahall, you can get 10 free coupon cash. This new jewelry making tutorial is about how to make easy bead earrings with blue cat eye beads and crystals. Do you like this design? Follow us to make your own earrings. Instructions: Materials and tools list: 8mm Blue Cat Eye Glass Beads: http://goo.gl/Mik9dG 6mm Electroplate Glass Crystals: http://goo.gl/lK7on9 2mm Round Seed Beads: http://goo.gl/2tWC1g Eyepins Headpins Jumprings Earrings Hooks 0.38mm Tiger Tail Wire Side Cutting Pliers Round Nose Pliers Wire Cutter Pliers How to start the blue glass and crystal earrings? 1. Measure and cut a length of tiger tail to approximately 40cm. Remove the curved tip by using wire cutter pliers. 2. String four 2mm seed beads to the center. Take the other wire end and pass through the last one to form a loop. 3. On the right wire end, add the following in sequences: one 8mm cat eye glass bead, one 2mm seed bead, one 6mm glass crystal, one 2mm seed bead and one 8mm cat eye glass bead. Then, take the left wire end and thread through the last cat eye glass bead from opposite direction. Tighten both wire ends. 4. Pass the left wire end through the next 2mm seed bead. On the right end, add one 2mm seed bead, one 6mm glass crystal, one 2mm seed bead and one 8mm cat eye glass bead. Finally, take the left wire end and thread through the last cat eye glass bead. Tighten both wire ends. Repeat the same processes for another time. 5. Take the left wire end and thread through next 2mm seed bead and the 8mm cat eye bead at the same time. Then, pass two wire ends through one 2mm seed bead, one 6mm glass crystaland one 2mm seed bead from the opposite directions. 6. Turnover the beaded part, add one 8mm cat eye glass bead, one 2mm seed bead, and one 8mm cat eye glass bead on the right wire end. Then, pass the left end through the last cat eye bead and tighten the wire. 7. Pass the left ends through the 2mm seed bead, 6mm glass crystal and 2mm seed bead nearby, and then add one 2mm seed bead and one 8mm cat eye glass beadon right wire end. Finally, pass the left wire end through 8mm cat eye bead from the opposite direction. Keep on making the same processes to complete the back part. Finally, loop the 4 seed beads. 8. Thread the leftover wire through the beads to get them stuck. Trim off any excess if necessary. 9. String the beaded part on an eyepin, leave 6mm pin and make a simple loop. 10. Make the dangle. Take a headpin, string one 8mm cat eye glass beadand one 6mm glass crystal. Keep 6mm pin and make a simple loop in the same way. 11. Connect the three parts and there you will get your first piece! In the rest, just repeat all the steps above them! An ingenious mixtureof blue cat eye glass beads and electroplate crystal make these earrings strand out. Just take a try, because they areexactlysimple and easy! Music Credits: Hayao Miyazaki "The Rose" More videos here: http://goo.gl/QyrmiO For the articles visit:http://goo.gl/ukL68X Follow along and have fun! PandaHall: http://www.pandahall.com/ PandaHall Learning Center: http://lc.pandahall.com/ PandaHall Facebook: https://www.facebook.com/PandaHallcom PHLC Facebook: https://www.facebook.com/PH-learningcenter-400863680020092/ PandaHall YouTube: https://www.youtube.com/user/PandaHallVideo PandaHall Google +: https://plus.google.com/u/0/+Pandahall/posts