Nissan Almera N16/Honda Accord Key Remote Programming

Nissan remote fob programming sequence: 1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds. 2. Then turn ignition switch to OFF position. Leave key in ignition switch. 3. After 2 seconds, the system will enter programming mode and will flash the warning lights twice. 4. Press and HOLD the unlock button on the remote key. 5. While pressing the unlock button, press the lock button 3 times. 6. Release the unlock button. 7. The warning lights will flash once to indicate successful programming. 8. Repeat procedure 4 to 7 for up to 4 key’s. 9. When completed turn ignition ON, and the warning lights will flash 2 times. 10. Remove key, and check all remote key’s for operation. Notes: - This procedure works for these vehicle models: * ALMERA * ALMERA TINO * PRIMERA * MAXIMA * MICRA * SERENA * VANETTE CARGO * TERANO II * Honda Accord * xtrail - thanks to Sergejs Baltmanis for sharing - The programming mode will stop when either the ignition is switch ON, 4 keys have been programmed or no input signal either from the switch or remote keys has been received for 120 seconds.