Honda CBR600RR 2004 double projector bi xenon lens installation retrofit

https://www.retrofitlab.com/en/motor-1/honda-cbr600rr-mh1-1.html Please click on the link here in the top, you can find the products in our shop! Check out our new Facebook group: https://www.fb.com/groups/EuropeanHeadlightFanatics/ Always want double lights, and ofcource a good light output? This is a pretty easy set up, with automatic centred projectors and special made brackets. 0:03 remove the bulbs and put the headlight in the box for about 16 minutes 0:14 separate the glass from the housing with a flat screw driver 0:22 unscrew the reflector with the leveling screws 0:31 remove the black clips, these will be reused later on the new brackets 0:38 screw the projectors in the special brackets wth the included screws and spacers 1:41 now you've to place the black clips from earlier and put the whole bracket back in the housing and screw it u with the leveling screws on the back 2:03 glue the shrouds (with normal contact glue of 2 components epoxy) on the projector (I've mount angel eyes on these and painted them black matte) 2:20 put the glass back on the houses after you've checked there's still enough butyl inside! 2:25 put it back in the carton box and heat it again for about 16 minutes 2:43 press the glass in the housing and make 22mm holes in the rubber caps for the wires 3:11 remove the pins in the connector to release it, so you can put these wires through the rubber rings 4:05 place the bulbs in the projector and secure them, put the rubber caps on the back and place the pins back in the connectors 4:58 final view low beam 5:00 final view angel eyes Any questions? Contact us directly! http://www.retrofitlab.com [email protected] +31 (0)341-820220 Retrofitlab.com Tolweg 2W 3851SK Ermelo Netherlands