Home made bait tank with Pump, filter and Aerator.

Home made bait tank with filter, air, and pump. Made this out of a 55gal drum a buddy gave me and spent only $75 on making the filter, aerator, and pump. After the under water video the sound get muffles due to a drop of water in the mic hole. More info available at http://texasfishingforum.com/forums/ubbthreads.php/topics/7870030/ I do not have a parts list but let em see what I can make up from memory and answer some questions. 1. 1x Attwood Recirc 500gph 12v pump 2. 1x 6" pvc pipe 3. 1x 2' PVC pipe 4. 1x 6" pressure cap (for the bottom) 5. 1x 6" screw cap end (female) 6. 1x 6" screw cap (male) 7. 1x 6" Coupler with 2" discharge 8. 1x 1/8" Ice maker tubing 9. 1x 55gal drum (white or blue) I used Krylon Plastic paint for the inside of the tank. The filter was put together and tapped with a rubber mallet to seat properly. Then I took a small stainless screw in each one of the parts to hold it together. I used the screw so I cold take it apart if i wanted or needed to. I drilled a hole in the pressure cap and screwed the recirc pump into it. The small tubing goes into very bottom of the pressure cap to give it some air to suck in for air in the water. BTW I have a Lifeproof case for my Iphone so it is not ruined and was not even wet.