Fixing Skylake, Haswell, and Ivy Bridge CPU temps: IHS removal

UPDATE 09/01/2015: Skylake CPUs are available now, and it looks like Intel did not change the manufacturing process of the thermal paste. Skylake still uses paste instead of solder between the IHS and die. UPDATE 06/02/13: Haswell just launched, and this method still applies. The CPU in the video is an Ivy Bridge, but the delidding of Haswell still applies. -------------------------------------------------------------------------------------------------------------- Intro and background: With this generation of Intel processors, Intel decided to cut corners and use very cheap TIM (thermal interface material) between the bare CPU die and the top IHS (integrated heat spreader). Cheap TIM does not transfer heat away from the die well, that's why Ivy Bridge processor heat up very fast, especially when overclocking. With Sandy Bridge and earlier CPU's, Intel used fluxless soldering between the CPU die and the IHS, so they do not have this problem. By taking the IHS off of Ivy Bridge processors to apply a better TIM, you can get a significant reduction in temperatures without needing additional cooling hardware. As a result from this simple mod, you may get a higher max overclock, more stable results, or reduction in fan noise for a quieter computer. Do not try this with Sandy Bridge or earlier processor generations since they are soldered on, and much harder to remove the IHS. INDEX 00:15 - temps before mod 02:24 - removing the IHS 10:02 - cleaning old stock thermal paste 12:56 - cleaning sealant glue 15:54 - applying new thermal paste 17:27 - installation into motherboard 20:27 - concluding temp results As of 09/02/2015, here are some high end processors that this works on: i7-6700k i5-6600k i7-4790k i5-4690k i7-4770k i5-4670k i7-3770k i5-3570k