Fix cannot install Windows on dynamic disk

When you're going to install Windows on your computer or laptop, but you can't select the disk that you want. And if you click 'Show details', you see this message "Windows cannot be installed to this hard disk space. The partition contains one or more dynamic volumes that are not supported for installation." This means that you can't install Windows on the dynamic disk. * Note: This solution choose to clear any data and information on disk so if you have any important data on the disk, you have to move it or backup to other disk first. * Warning: If you did software RAID 0, or RAID 5 on the disk, converting the disk to basic will break the RAID and you will lose data on the RAID. To fix this issue, you have to convert the disk to basic disk. In this video, I will use the clean command in disk part program to clear any data and information on the disk. 1. On the page that you have to select a disk to install Windows, press Shift + F10 to open command prompt window. 2. Type 'diskpart' and press Enter. 3. Type 'list disk' and press Enter. This command displays all disks on the computer. 4. Select disk that you want. In this example, I will select the first disk (disk 0), so I type 'select disk 0'. And press Enter. 5. Then, type 'clean' and press Enter to delete any information on the disk. 6. Type 'exit' and press Enter. 7. Close the command prompt window. 8. Click 'Refresh' to update disk status. 9. Now you can create partition or choose the disk to install Windows. === References Basic and Dynamic Disks https://msdn.microsoft.com/en-us/library/windows/desktop/aa363785(v=vs.85).aspx Standard RAID levels https://en.wikipedia.org/wiki/Standard_RAID_levels