etrailer | CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10001G-4 Review

Click for more info and reviews of this CE Smith Boat Trailer Parts: https://www.etrailer.com/Boat-Trailer-Parts/CE-Smith/CE10001G-4.html Check out some similar Boat Trailer Parts options: https://www.etrailer.com/dept-pg-Boat_Trailer_Parts-sf-Roller_and_Bunk_Parts.aspx https://www.etrailer.com Don’t forget to subscribe! https://www.youtube.com/user/etrailertv Full transcript: https://www.etrailer.com/tv-Demo-CE-Smith-Boat-Trailer-Parts-CE10001G-4.aspx Today we're gonna be taking at look at the CE Smith Bolster and Swivel Bracket Assembly. Now this item is sold individually with part number CE10001G or it's available in a four-pack with part number CR10001G-4. We offer both of those options here at etrailer.com. This bolster and swivel bracket assembly is gonna let you mount a bunk-board on your board trailer. It's gonna feature the dimpled bolster bracket surface. This is gonna help prevent the bracket from sliding along the trailer frame so this is gonna provide more grip at the contact area. It's also gonna feature the elongated mounting slots. These allow for that height adjustment needed for your application during the installation. Each bracket installs vertically on your boat's trailer frame with the U bolt. The U bolt is sold separately. The unit's gonna also come with a strong swivel bracket. That's this piece right here. This is going to allow you to tilt the bunk-board. That's gonna help you to fit the bolt hole snugly onto the trailer during the loading process. Hardware is included to get the swivel bracket attached to the bolster bracket. The unit's constructed of 11 gauge galvanized steel. It's gonna do a great job at resisting rust and corrosion. It is suitable for saltwater exposure. The product's made in the USA. If we take a measurement of the overall height, measuring from very bottom to very top, that's gonna give us a measurement of 11 inches tall. The dimensions of just the bolster bracket, so measuring just the height of the or the overall length, that's gonna measure ten inches by two-and-a-half inches wide. The mounting slot's on the unit. From edge to edge, they measure three-and-three-quarters of an inch long by a half inch wide. The space right here between the mounting slots is a half inch. When it comes to the dimensions of the actual swivel bracket, going edge to edge this direction, that's gonna give us a measurement of three-and-a-half inches long. It's going to measure about one-and-three-eights of an inch wide and then the overall height of just that bracket so from this piece right here to the top is two inches tall. The mount hole diameters on that bracket, those measure three-eights of an inch in diameter and those holes are spaced apart from one another on center by two-and-a-half inches. That's gonna do it for today's look at the CE Smith Bolster and Swivel Bracket Assembly.