Cant init device, Reason: CMD Timeout Error

Z3X EasyJtag Box JTAG Софт версия. 2.5.0.2 Loading eMMC Addon Firmware... IO: 1800 mV Box С/Н: 0Bxxxxxxxxxxxxx0, ,Микропрограмма Вер.: 01.56 font color=red Warning: CMD Pullup Level (0 mV) too low , check cables etc.! /font Напряжение активной линии CMD :0 mV Box IO Level:1800 mV CLK Rate:14000 khz HiPower mode is off! Can't init device, Reason: CMD Timeout Error Сделано.